Zia Mouldings Established as a Proprietor firm in the year 2022, we “Zia Mouldings” are a leading Manufacturer of a wide range of Plastic Injection Molding Machine, Plastic Pin, Plastic Hub, etc. Injection moulding is a forming process using moulds. Materials such as synthetic resins (plastics) are heated and melted, and then sent to the mould where they are cooled to form the designed shape. Due to the resemblance to the process of injecting fluids using a syringe, this process is called injection moulding. The flow of the process is as follows: Materials are melted and poured into the mould, where they harden, and then the products are taken out.With injection moulding, diversely shaped parts, including those with complex shapes, can be continuously and quickly manufactured in large volumes. Therefore, injection moulding is used to manufacture commodities and products in a wide range of industries. Blow molding is the forming of a hollow object by inflating or blowing a thermoplastic molten tube called a “parison” in the shape of a mold cavity. The process consists of extruding or “dropping” a parison on which female mold halves are closed. The female mold halves contain the shape of the product to be produced. The bottom opening of the parison is pinched shut by the closing female mold halves. A pressurized gas, normally air, is introduced into the parison blowing the heated parison out against the cavity walls to form the product.